3″ By 30M Canvas Delivery Pipe

3″ x 30M K-Max Canvas Delivery Pipe:  💧📏

Maintenance 🧼✨

• Drainage: Drain all water completely before storage to prevent weight gain and inner material degradation. 🚰

• Cleaning: Rinse off mud and debris after field use to keep the woven fibers clean. 🚿

• Drying: Always air-dry in a shaded, ventilated area before rolling up to avoid mildew. 🌬️

• Inspection: Routinely check for pinhole leaks or abrasions, especially if used on rocky terrain. 🔍

Dos and Don’ts ✅❌

• DO use 3-inch specific couplings (e.g., camlock or claw) for a secure, leak-free connection. 🔗

• DO unroll the full length before starting the pump to ensure proper pressure distribution. 🌊

• DO use protective padding if the pipe must cross sharp gravel or concrete edges. 🛡️

• DON’T use for suction; this hose is strictly for discharge (delivery) and will collapse under vacuum. 🚫

• DON’T exceed the rated pressure, as this can cause the pipe to burst. 💥

• DON’T drive vehicles over the pipe while it is pressurized unless protected by a ramp. 🚜

Questions & Answers ❓

Q: Is this the same as a 2-inch pipe? 🧐

A: No, this is a 3-inch pipe. It has a much larger diameter, allowing for significantly higher water volume (flow rate) per minute! 🚀

Q: Can I shorten this pipe? ✂️

A: Yes, you can cut it to size, but you will need to re-attach a new 3-inch coupling to the cut end. 🛠️

Q: Why is it called “Canvas”? 🎨

A: It is a traditional industry term due to the woven texture. The inner PVC/rubber lining is what actually keeps it waterproof and pressurized. 🛡️

Are you connecting this to a 3-inch water pump, or do you need help finding the right size couplings?