Kunda 192M Solar Submersible Pump
KSh64,500.00
| Parameter | Specification |
| Max Head (Lift) | 192 meters (or 192V DC operational rating) |
| Motor Power | 1500W to 2200W (approx. 2.0 to 3.0 Horsepower) |
| System Voltage | 192V DC (High-voltage configuration) |
| Max Flow Rate | $3.5 \text{ m}^3/\text{hour}$ to $7.0 \text{ m}^3/\text{hour}$ (Yield drops as depth increases toward 190m) |
| Outlet Size | 1.25-inch or 2-inch (Heavy-walled pipe recommended for high-pressure lift) |
| Motor Type | Permanent-magnet synchronous brushless DC (BLDC) |
The term “Kunda 192M” most commonly refers to the high-voltage 192V DC system configuration found in Kunda’s heavy-duty solar pump lineup (such as the 110-meter head model). However, if you are looking at a Kunda pump explicitly rated for a massive 192-meter maximum head (lift), it falls into their premium, deep-well high-head category.
Key Specifications & Performance
| Parameter | Specification |
| Max Head (Lift) | 192 meters (or 192V DC operational rating) |
| Motor Power | 1500W to 2200W (approx. 2.0 to 3.0 Horsepower) |
| System Voltage | 192V DC (High-voltage configuration) |
| Max Flow Rate | $3.5 \text{ m}^3/\text{hour}$ to $7.0 \text{ m}^3/\text{hour}$ (Yield drops as depth increases toward 190m) |
| Outlet Size | 1.25-inch or 2-inch (Heavy-walled pipe recommended for high-pressure lift) |
| Motor Type | Permanent-magnet synchronous brushless DC (BLDC) |
Core System Features
-
High-Voltage Efficiency: Operating at 192V allows the pump to draw less current (amperage) while delivering high torque. This minimizes power loss over long cable runs extending down deep boreholes.
-
Industrial MPPT Controller: The high-voltage external control box acts as the brain of the system. It tracks solar output in real-time to match the deep-lift demands and includes an explicit LED interface monitoring live wattage, voltage, and RPM.
-
Oil-Cooled Submersible Motor: Designed with a reliable oil-cooled chamber to dissipate heat effectively while submersed under intense pressure at deep elevations.
-
Integrated Safety Protocols: Equipped with automated dry-run protection, soft-start mechanisms (preventing water hammer inside your pipes), and severe over-voltage safeguards.
Solar Panel Array Setup
Due to the demanding 192V threshold, your solar array layout must be precise to keep the pump controller from shutting down under under-voltage or over-voltage codes.
-
Recommended Total Array Power: Minimum 2000W to 3000W of solar panel capacity.
-
The String Setup: You will need to wire your solar panels in series (connecting positive to negative sequentially) to build up the voltage.
Typical Configuration: 6 to 8 heavy-duty panels (e.g., 400W–550W each) wired in a straight series string. Always ensure the total Open Circuit Voltage ($V_{oc}$) of your combined panels does not exceed the absolute maximum input limit stamped on your specific Kunda control box.
Reviews
There are no reviews yet.