Kailo 2.0 HP Submersible Water Pump

KSh23,240.00

Key Specifications & Performance

Parameter	Specification
Power Output	2.0 Horsepower ( $\approx 1.5 \text{ kW}$ )
Operating Voltage	220V–240V AC, 50Hz (Single-phase home/farm power)
Maximum Head (Lift)	149 meters (Absolute vertical pushing limit)
Rated Flow Rate	3,000 Liters per Hour ( $3 \text{ m}^3/\text{hour}$ )
Cable Length	20 meters of heavy-duty, waterproof submersible cable included
Material Build	Premium stainless steel outer housing, integrated check valve
Control Box	Included ( houses start/run capacitors and override switch)

The Kailo 2.0 HP Submersible Water Pump is a heavy-duty, high-capacity electrical pump designed for deep boreholes, commercial agricultural irrigation, and supplying water to multi-story structures.

At 2 Horsepower, this model offers a significant boost in performance, capable of pushing water from extreme depths up to a maximum head limit of nearly 150 meters. It runs on standard single-phase 220V AC household electricity and utilizes durable Italian-style copper-wound motor engineering.

Key Specifications & Performance

Parameter	Specification
Power Output	2.0 Horsepower ( $\approx 1.5 \text{ kW}$ )
Operating Voltage	220V–240V AC, 50Hz (Single-phase home/farm power)
Maximum Head (Lift)	149 meters (Absolute vertical pushing limit)
Rated Flow Rate	3,000 Liters per Hour ( $3 \text{ m}^3/\text{hour}$ )
Cable Length	20 meters of heavy-duty, waterproof submersible cable included
Material Build	Premium stainless steel outer housing, integrated check valve
Control Box	Included ( houses start/run capacitors and override switch)

Core Engineering Features

Italian Copper Core Technology: Engineered with high-grade, 100% copper windings sealed within an oil-cooled chamber. This configuration dissipates heat rapidly under heavy, continuous pumping cycles to prevent the motor from burning out.
Hermetically Sealed Design: The fully submersible setup completely shields the electrical internals from water ingress, ensuring maximum motor cooling through ambient water contact.
Integrated Check Valve: A one-way check valve is built directly into the pump head to stop high-pressure water columns from traveling backward when power cuts out, protecting the internal impellers from premature mechanical wear.
Advanced Thermal Overload Protection: Features a built-in safety sensor that automatically trips and shuts the pump down if the motor encounters excessive heat due to a dry-running borehole, restarting once temperatures drop.

Power Supply & Generator Matching Guidelines

Because a 2 HP motor draws a massive, instantaneous surge of current to crack open its starting torque, matching your power equipment correctly is non-negotiable:

Mains / Grid Power: Standard home single-phase outlets work fine, but you should run this pump on a dedicated circuit breaker (minimum 20A–32A breaker recommended) to avoid tripping household lights during startup.
Generator Sizing: If you are running this off a remote farm generator, a standard 5kVA or smaller generator will choke or stall immediately. You need a minimum 7.5 kVA to 8.5 kVA gasoline or diesel generator to cleanly handle the initial inductive startup spike.
Solar Inverter System: To power this pump via an off-grid solar storage system, your Pure Sine Wave inverter must feature a peak surge rating of at least 6,000W to 7,000W.