24V DC booster pump

KSh4,995.00

Feature	Technical Specification
Operating Voltage	24V DC (Operational range: 20V – 28V)
Rated Power Options	370 Watts (0.5 HP) or 550 Watts (0.75 HP)
Current Draw	15 Amps (for 370W) up to 22 Amps (for 550W)
Max Vertical Head (Lift)	25 to 35 meters ( $\approx 2.5 \text{ to } 3.5 \text{ bar}$ of pressure)
Max Flow Rate	2,200 to 2,700 Liters per Hour (~36 to 45 L/min)
Max Suction Lift	5 meters (Requires a foot valve to hold prime)
Inlet / Outlet Size	1-inch BSP female threaded ports
Build Materials	Heavy cast-iron housing, 100% Copper windings, Solid Brass Impeller
Control Method	Manual ON/OFF (Must be paired with a float switch or manual breaker)

24V DC booster pumps offers a massive technical advantage: doubling the voltage cuts the current (amperage) in half for the same power output. This means you can use significantly thinner power cables over longer distances without worrying about crippling voltage drops or overheating wires.

24V Peripheral Surface Pumps

These rugged, cast-iron or aluminum transfer pumps look exactly like traditional mains-powered utility pumps but are wound for safe 24V DC operation.

Best Used For: Off-grid farm irrigation, pushing water up from a low tank to a rooftop reservoir, and clean water transfer.
Key Specifications:
- Power Rating: 260W to 370W (approx. 0.5 HP)
- Current Draw: 10A to 15A
- Max Vertical Head: 25 to 40 meters (An incredible vertical push compared to 12V models)
- Max Flow Rate: 2,000 to 3,500 Liters per Hour ( $\approx 33\text{ to }58\text{ L/min}$ )
- Inlet/Outlet: Standard 1-inch threaded ports

How to Power a 24V System

Direct Solar Connection: You can run these directly using solar panels. To achieve a 24V working system, you can either use a single large 24V solar panel (usually 300W or larger) or wire two standard 12V panels in series (connecting positive to negative).
Battery Systems: Perfect for running straight off a 24V battery bank (common in trucks, large RVs, or 24V off-grid solar storage configurations built by linking two 12V deep-cycle batteries sequentially).
Mains Power: To run these from a household wall socket, you will need a 220V/110V AC to 24V DC power supply transformer rated for at least 15 Amps for surface pumps, or 6 Amps for diaphragm/inline models.