Meakida 2200W Demolition Hammer

The Meakida 2200W Demolition Hammer (Model MD-85A) is a heavy-duty electric jackhammer commonly available in the East African market. It is designed for demanding construction tasks such as breaking up concrete, masonry, brick, and asphalt.

Key Specifications

Detailed Application

This tool is built for high-impact demolition work where manual labor is insufficient. Its primary applications include:

• Concrete & Masonry Demolition: Breaking up floor slabs, concrete walls, or reinforced concrete foundations.

• Road & Infrastructure Work: Chipping away asphalt or breaking up paving and rock.

• Wall/Floor Slotting: Used in renovation projects to channel paths for electrical conduits or plumbing pipes.

• Site Preparation: Removing old tiles, brickwork, or dense masonry during building renovation.

Maintenance

To extend the lifespan of your Meakida demolition hammer, follow these practices:

• Oil Maintenance: Regularly check the viewable oil port. Ensure the machine is properly lubricated with the manufacturer-recommended oil to prevent internal overheating.

• Cleaning: Use compressed air to blow out dust from the motor vents after every use. Accumulated concrete dust inside the motor can lead to electrical shorts.

• Carbon Brushes: These wear out over time. Inspect them periodically and replace them before they are fully depleted to avoid damaging the motor armature.

• Bit Maintenance: Keep the shank of your chisel or point bits clean and lightly greased. This ensures smooth movement in the chuck and prevents “seizing.”

Dos and Don’ts

• DO use sharp bits. A dull bit requires more force and causes the motor to overheat and the tool to wear out faster.

• DO wear personal protective equipment (PPE), specifically ear protection, eye goggles, and a dust mask.

• DO apply steady, downward pressure. Let the machine’s impact energy do the work rather than forcing it with your weight.

• DON’T run the machine continuously for hours at a time; allow it to cool down to prevent motor burnout.

• DON’T use the tool as a pry bar to lever out chunks of concrete, as this can snap the chisel bit or damage the chuck.

• DON’T operate without checking that the handle is securely locked in your desired position.

Common Questions & Answers

Q: Is Meakida a professional or DIY brand?

A: Meakida is generally positioned as an affordable, industrial-grade brand. While it provides high power suitable for professional construction sites, it is typically priced for contractors looking for a cost-effective alternative to premium global brands.

Q: Why does the machine lose power during use?

A: This is often due to three things: dull bits, low oil levels, or worn carbon brushes. Ensure the oil reservoir is filled and the brushes are in good condition. If the motor sounds strained, stop immediately and let it cool.

Q: Can I use this for drilling holes in concrete?

A: No. This is a demolition hammer (jackhammer), which provides only impact force for breaking/chipping. It is not designed for rotary drilling (which requires a hammer drill with a chuck that rotates). Using it for the wrong purpose will damage the internal mechanism.

For any assistance be sure to contact us.