Freevel 100L Electric Air Compressor 7Hp Petrol Driven
KSh45,000.00
Key Specifications
-
Tank Capacity: 100 Litres.
-
Engine Power: Typically 7.0 HP petrol engine.
-
Pump System: Belt-driven, double-piston (twin-cylinder) pump.
-
Max Pressure: 8 Bar (116 PSI).
-
Power Source: Petrol engine (off-grid capable).
-
Starting System: Recoil (manual pull-start).
Key Features
-
Portability: Includes a wheel kit and handle for easier movement.
-
Durability: Features a heavy-duty steel tank designed for industrial and workshop use.
-
Versatility: Ideal for remote construction sites, vehicle repair, and off-grid locations where electricity is not available.
Safety & Maintenance Reminders
-
Outdoor Use Only: Because it is powered by a combustion engine, never operate this compressor in enclosed spaces due to the danger of carbon monoxide (CO) poisoning.
-
Moisture Drainage: Regularly open the drain valve at the bottom of the 100L tank after use to release accumulated condensation and prevent internal corrosion.
-
Oil Checks: Maintain proper oil levels in both the engine and the pump, and follow the manufacturer’s suggested intervals for oil changes.
-
Air Filters: In dusty environments (like construction sites), inspect and clean the air intake filters frequently to maintain peak engine and pump performance.
Key Observations from the Image:
-
Power Source: It is equipped with a standalone internal combustion petrol engine, which allows for off-grid operation.
-
Drive System: The unit uses a belt-driven system to connect the petrol engine to the pump, which is typical for heavy-duty, industrial-grade compressors.
-
Pump Configuration: It features a double-piston (twin-cylinder) pump, which is designed for efficient air compression and faster recovery rates.
-
Tank Capacity: The tank is marked as 100 Liters, providing a significant reserve of compressed air for extended tool use.
-
Accessories: The image includes a set of wheels and mounting hardware, which are used to improve the portability of the unit. It also includes an instruction manual.
General Specifications for this Class of Compressor:
While specific performance data can vary by manufacturer, compressors of this specific build typically feature:
-
Engine Power: Commonly ranging between 7Hp
-
Max Pressure: Generally rated for 8 Bar (116 PSI), which is standard for most pneumatic tools, spray painting, and tire inflation.
-
Start System: Most of these units utilize a recoil (pull-start) mechanism.
Important Maintenance Tips:
-
Oil Maintenance: Because this is an oil-lubricated system, ensure the oil level is checked regularly using the sight glass. Use the recommended oil grade for the engine and the pump separately.
-
Drain Moisture: Always drain the condensed water from the bottom of the 100L tank after each use to prevent internal rust and corrosion.
-
Air Filter: Clean the air intake filter frequently, especially if operating in dusty construction or outdoor environments, to maintain engine and pump performance.
-
Belt Tension: Periodically check the tension of the drive belt to ensure it is not slipping, which can reduce efficiency.
Reviews
There are no reviews yet.